Brake Caliper Piston Rewind Tool, Steel Wind Back Set for Brake Pads，3

Product Name:Brake Caliper Piston Rewind Tool SetMaterial:SteelColor:Black and SilverComponent Dimensions:T-handle threaded screw: approximately 5.51 x 3.93 inKnurled sleeve/press block: approximately 1.14 x 2.16 in2-pin adapter disc: approximately 1.77 in diameterReaction plate: approximately 1.96 x 3.62 inPackage Includes:1 x T-handle threaded screw1 x Knurled sleeve/press block1 x 2-pin adapter disc1 x Reaction plateProduct Features:This manual brake piston wind back tool is designed to rotate and retract compatible screw-in disc brake caliper pistons when replacing worn brake pads. The T-handle provides controlled leverage, while the reaction plate supports the tool inside the caliper and the 2-pin adapter engages a matching piston face.Fitment Notice:This tool is not universal. Before ordering, compare the listed dimensions, 2-pin pattern, available caliper space and thread direction with your vehicle’s brake piston. Do not use it on a push-only piston or electronic parking brake system unless the vehicle service manual specifically calls for this type of mechanical wind back tool.Use Note:Align both pins completely before applying pressure. Turn the handle slowly and evenly. Do not force a seized or heavily corroded piston, as excessive force may damage the tool or brake components.

• STEEL CONSTRUCTION – Made of steel with a black-finished threaded screw and plated working components. The wide T-handle and knurled sleeve provide a secure manual grip for controlled brake piston service.
• FIT CHECK BEFORE ORDERING – Match the caliper piston’s 2-pin pattern and available working space to the listed dimensions. Fully seat both pins before turning to help reduce slipping, and never force a seized or heavily corroded piston.
• DETAILED DIMENSIONS – T-handle screw: 5.51 x 3.93 in; knurled sleeve: 1.14 x 2.16 in; 2-pin adapter disc: 1.77 in diameter; reaction plate: 1.96 x 3.62 in. Please allow minor measurement variation.
• FOR COMPATIBLE SCREW-IN PISTONS – Designed to rotate and retract matching disc brake caliper pistons during brake pad replacement. Suitable only for compatible vehicles; verify the pin pattern, thread direction and factory service procedure before purchase.
• SIMPLE MANUAL SETUP – Position the reaction plate against the caliper, install the knurled sleeve and 2-pin adapter, align both pins with the piston, then turn the T-handle slowly and evenly. Secure the vehicle on rated stands and follow its service manual.