V2S Modular Chassis Kit and Transmission for 1/24 Custom Builds, 12mm Mount

Chassis Kit Features:Modular front and rear shock towers (FRONT: 8mm of upward/downward adjustability, REAR: can accommodate links ranging from 69-105mm+)Dynamic skid angle (17-20 degrees. As the rear tower extends, it also steepens the skid angle. This means that increasing rear link length proportionally increases your skid angle as well)Flexible wheelbase, easily switch between short and stretched wheelbase configurationsAdjustable delrin rear electronics trayMagnicorn mountsUpdated delrin skid to reduce hang-upRedesigned delrin front brace/battery trayCloser hole spacing on front shock tower for more fine-tuningTransmission Set Features:Designed for V2S Modular chassisMachined delrin skid plate, with 8mm mounting spacing~2mm lateral adjustability of transmission on skidMachined aluminum motor plate, gray anodizedOptional 12mm spacing and 9mm spacing motor plateMotor relocated much lower for lower center of gravityQuiet, durable, low friction delrin gears with integrated stainless steel shaftsSteel sealed bearings for smooth operation2.68:1 ratio with 55 tooth, 0.3 mod spur gearNOTES:This chassis and transmission set is ideal for experienced builders, it requires you to select and match suitable links, electronics, and other key parts. Not recommended for beginners (though you're welcome to try)The skid plate in the transmission bag is intended for direct matching installation with the chassis, while the skid plate in the chassis bag can be set aside for use in other built.This transmission is designed for rear facing motor. Can possibly be mounted motor forward with some modifications, but will likely have clearance issues with the front upper links.

• Fully tunable geometry, front towers offer 8mm vertical adjustment; rear towers accept links from 69-105mm+, with skid angle auto-adjusting from 17° to 20° as you extend, dial in your exact handling balance
• Instant wheelbase swap, switch between short and stretched configurations without extra parts; redesigned Delrin front brace/battery tray and closer shock-tower hole spacing give you fine-tuning precision
• Low-CG transmission, motor sits significantly lower for improved stability; includes machined gray-anodized aluminum motor plate with optional 12mm or 9mm hole spacing to fit your motor choice
• Durable, quiet drivetrain, low-friction Delrin gears with integrated stainless steel shafts, plus sealed steel bearings, 2.68:1 ratio (55T spur, 0.3 mod) for smooth, reliable power delivery
• Purpose-built for advanced builders. Requires your own links, electronics, and hardware, not for beginners, but a dream platform for experienced tuners